- Current and older Wifi standards
- Wifi 6
- Wifi Components
- wireless access point (AP)
- Wireless routers
- Mobile Hotspot
- Wifi performance
- Transmitter power
- Wifi Security
Wi‑Fi is a trademark of the Wi-Fi Alliance. It belongs to the family of radio technologies commonly used for wireless local area networking (WLAN) devices.
Current and older Wifi standards
Standards operate on varying frequencies, deliver different bandwidths, and support different numbers of channels.
Transmits at 5 GHz frequency band of the radio spectrum with 54 megabits of data per second.
Orthogonal frequency-division multiplexing (OFDM) splits radio signals into several sub-signals before they reach a receiver to reduce interference.
Transmits at 2.4 GHz with a speed of 11 megabits of data per second
Complementary code keying (CCK) modulation to improve speeds
Transmits at 2.4 GHz but faster up to 54 megabits of data per second. It uses OFDM coding.
Speeds 140 megabits per seconds. Backward compatible with a, b and g.
Transmit up to 4 streams of data, each at a maximum of 150 megabits per second, but most routers only allow for 2 or 3 streams.
Backward compatible with 802.11n and thus others. 450 megabits per second on a single stream. It is also called 5G WiFi because of its frequency band .
(+) Very High Throughput (VHT)
Wi-Fi CERTIFIED 6 networks enable lower battery consumption in devices, making it a solid choice for any environment, including smart home and Internet of Things (IoT) uses.
- wireless access point (AP) allows wireless devices to connect to the wireless network.
takes the bandwidth coming from a router and stretches it so that many devices can go on the network from farther distances away. Gives useful data about the devices on the network, provide proactive security, and serve many other practical purposes.
- Wireless routers are hardware devices that Internet service providers use to connect you to their cable or xDSL Internet network.
combines the networking functions of a wireless access point and a router.
- Mobile hotspot – feature on smartphones with both tethered and untethered connections
share your wireless network connection with other devices
Wi-Fi operational range depends on factors such as the frequency band, radio power output, receiver sensitivity, antenna gain and antenna type as well as the modulation techniquea and propagation charestristics of the signal
Compared to cell phones and similar technology, Wi-Fi transmitters are low power devices. In general, the maximum amount of power that a Wi-Fi device can transmit is limited by local regulations, such as FCC Part 15 in the US. Equivalent isotropically radiated power (EIRP) in the European Union is limited to 20 dBm (100 mW).
An access point compliant with either 802.11b or 802.11g, using the stock omnidirectional antenna might have a range of 100 m.
WEP (Wired Equivalent Privacy)
The client connects to a WEP-protected network, the WEP key is added to some data to create an “initialization vector” IV
WiFi Protected Access version 2 (WPA2)
Successor to WEP and WPA. It uses either TKIP or Advanced Encryption Standard (AES) encryption.
WiFi Protected Setup (WPS)
WPS ties a hard-coded PIN to the router for setup is vulnerable for exploitation by hackers
WPA3 uses the latest security methods, higher grader security protocols
Disallow outdated legacy protocols
Require use of Protected Management Frames (PMF)
- (+) Increased protection from password guessing attempts
- Better password protection through Simultaneous Authentication of Equals (SAE), which replaces Pre-shared Key (PSK) in WPA2-Personal.
192-bit minimum-strength security protocols and cryptographic tools
Authenticated encryption: 256-bit Galois/Counter Mode Protocol (GCMP-256)
Key derivation and confirmation: 384-bit Hashed Message Authentication Mode (HMAC) with Secure Hash Algorithm (HMAC-SHA384)
Key establishment and authentication: Elliptic Curve Diffie-Hellman (ECDH) exchange and Elliptic Curve Digital Signature Algorithm (ECDSA) using a 384-bit elliptic curve
Robust management frame protection: 256-bit Broadcast/Multicast Integrity Protocol Galois Message Authentication Code (BIP-GMAC-256)
 wi-fi.org https://www.wi-fi.org/
 Wikipedia https://en.wikipedia.org/wiki/Wi-Fi
 wi-fi.org https://www.wi-fi.org/discover-wi-fi/wi-fi-certified-6
Software Defined Networks ( SDN) and Network Function Virtulaization ( NFV) for Communication networks
Innovations in telecommunication today are largely driven by the advancements in Open source tech tools, standards and stacks. IP-based video and voice communication systems, Unified Communication systems such as Enterprise CPaaS platforms or even an external independent VoIP provider. The challenge for service providers today is that operating costs are growing faster than revenues. A…
5G and IMS
striking features of 5G – entirely IP based ability to connect 100x more devices ( IOT favourable ) speed upto 10 Gbit/s high peak bit rate high data volume per unit area virtually 0 latency hence high response time
4G/Long Term Evolution (LTE), VOLTE
LTE stands for Long Term Evolution and is a registered trademark owned by ETSI (European Telecommunications Standards Institute) for the wireless data communications technology and a development of the GSM/UMTS standards.